vr
Jiangyin Huamei Photoelectric Science and Technology Co., Ltd.
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
quote
Home
about us
Company Profile
factory tour
quality control
FAQ
products

PET Silicone Release Film

Anti Static PET Film

Non Silicone Release Film

Release Coating Polyester Film

OCA PET Silicone Release Film

Polarizer Protective PET Silicone Release Film

MLCC PET Silicone Release Film

OLED PET Antistatic Release Film
blogs
solutions
contact us
quote
home
about us
Company Profile
factory tour
quality control
FAQ
products

PET Silicone Release Film

Anti Static PET Film

Non Silicone Release Film

Release Coating Polyester Film

OCA PET Silicone Release Film

Polarizer Protective PET Silicone Release Film

MLCC PET Silicone Release Film

OLED PET Antistatic Release Film
blogs
solutions
contact us
quote
banner banner
Blog Details
Created with Pixso. Home Created with Pixso. Blog Created with Pixso.

How to package the PET release film?

How to package the PET release film?

2023-05-10

Core Packaging Components

  1. Rigid Cores

    • Use 3-inch diameter cardboard cores with ≥6 mm wall thickness.

    • End caps (plastic/polyethylene) prevent core deformation during handling.

    • Critical for: Preventing roll telescoping or edge damage.

  2. Surface Protection Layer

    • Wrap each roll with anti-static polyethylene film (surface resistivity: <10¹¹ Ω/sq).

    • Seal edges with static-dissipative tape to block dust/moisture ingress.

    • Avoid: Standard plastic wraps (generate static) or paper (sheds fibers).

  3. Void Fill & Cushioning

    • Edge guards: Rigid corner protectors (≥50 PSI compression resistance).

    • Interleaving: Place anti-static foam sheets between rolls in multi-roll boxes.

    • Prevents: Roll-to-roll abrasion during transit.


Proper packaging prevents >95% of transit-related defects (core crush, silicone transfer, ESD failure). Partner with logistics providers certified in ISTA 3E or ASTM D5276 testing for validation. Always conduct trial shipments before scaling!